How to Test Your Alarm System

As the owner of a security system, it’s important that you periodically check your system to make sure that it is working properly. Because your security system is responsible for monitoring the safety of your home and family, you should make sure that your alarm system is communicating with the monitoring station. There are a few simple guidelines that you can follow to perform a successful check of your alarm system.

1. Call your home security system provider. Let them know that you will be performing a test on your system. They will make sure that the authorities are not dispatched to your home during the test.
2. Make sure that your alarm system is armed.
3. Open several doors and/or windows to trigger the alarm system.
4. Your system will trigger the alarm and send a signal to your alarm’s monitoring station.
5. Disarm your system as you normally would.
6. Contact your alarm system provider and let them know that you have concluded your test. Make sure to ask them to reactivate your monitoring.

It couldn’t be easier to test your alarm system. This step is important in making sure that your alarm system is fully functional. You should perform this test monthly and contact your home burglar security alarm systems provider if you experience any abnormal operation.

Lightning alarm update

If you are experiencing problems with your alarm system after there has been a lightning strike in the area then chances are that your system has been effected.  There are several reasons why this happens but the most basic principal is that when lightning strikes it searches out the best sources of ground and what usually happens is that electronics are over energized and are adversely effected.  Please call our service department immediately at 800-762-3196 to help solve your problem.